Solid Edge ST7 Launch "Reimagine what's possible" Seminar

Picture Solid Edge ST7 Launch "Reimagine what's possible" Seminar --13 Aug 2014 , Hotel Sunway Spa MALAYSIA---‪#‎Sunway‬ Hitachi Technology Sdn Bhd ---from MyCADnik

 Waiting to Seminar

 Test the fast use Solidedge

  Side view Waterpark at Sunway Lagoon

 

 Source MyCADnik Drafting-Design-Analysis

Turn Legacy 2D Data into 3D Models - Alibre Design Tips

Put old 2D drawings to use by importing them into Alibre Design and copying components into the 3D workspace to make 3D parts.

Alibre Design enables you to use 2D data (for example, your legacy data from an older 2D program) as the basis for generating 3D models. The basic process is simple -- import your 2D drawings into Alibre Design and then copy components of the drawing, such as lines and points, into the 3D workspace as the sketch you'll use for feature creation. This column will walk you through this process while giving you hints about transforming your drawings from other programs into 3D models in Alibre Design.

Importing a DXF or DWG
1. Go to File / Import and find the DXF or DWG file that you wish to use.

Import File dialog box.

DXF/DWG import options.

2. Choose your import options.
Maintain Projection means that it will maintain the orientation that the file was created with. Import Only Visible Layers means that Alibre will import only those layers that were set visible when the file was initially saved.

3. Activate the sketch on the sheet to enable the selection of the sketch figures. Do this by right-clicking in open space and selecting Activate Sketch on Sheet.

Activate Sketch On Sheet option.

4. Select the figures that you want to use to create your model. The figures you select will typically be profiles that are representative cross sections of the part. In the example model, which would make use of a Revolve Boss feature in a 3D workspace, I'll need to find the component of the drawing that represents the profile I'm after. In this case, it's the set of lines shown below in light blue. You can see how if you revolve this profile around main centerline, the main 3D solid would be created. Copy these sketch figures by selecting Edit / Copy from the menu bar after you select them.

Sketch figure selection.

5. After copying the sketch figures, open a new Part workspace and create a new sketch. Go to Edit / Paste to paste the figures you copied earlier into the new sketch.

Paste sketch from a 2D drawing into a Part workspace.

6. Depending on where the figures you copied were in relation to the 2D drawing, the figures might get pasted away from the origin. Use the Sketch Move tool to move your sketch to the proper orientation for the feature you are going to use. Access the Sketch Move tool by selecting Sketch / Move from the menu bar. Below you can see I've moved the sketch from its initial location to one to the left of the origin.

Sketch Move tool.

To use to the Sketch Move tool you will need to:

1. Select the Figures icon. Select the figures that you want to move.
2. Select the From icon. Select a node on the sketch figures where you want the orientation of the move to be from.
3. Select the To icon. Select the new orientation where you want the sketch to be placed.
4. Select Apply to apply the move.

7. Now that the new sketch is located where I want it, I need to run the Analyze Sketch tool to locate any potential problems with the sketch (for example, overlapping figures). Select the Analyze Sketch tool from the Sketch / Analyze menu bar.

Sketch Analyze tool.

Note: In addition to finding errors, Alibre Design will show you where in the sketch they are located. Just click on any errors that may pop up after clicking Analyze. Some errors allow you to use the Heal option to fix them automatically.

8. Now that I've got the sketch located and error-free, I can use it just like any other profile as the basis for a 3D feature. You can dimension it, constraint it, and then turn it into a solid. I'll use the Revolve Boss feature on the profile to get the solid below. I can now go in and add some of the final details, such as holes and chamfers, to finish out the part.

Preview of a Revolve Boss based on the profile.

Top Cover model.

Using your existing 2D data to generate 3D models is a straightforward process. The advantages of having your data in 3D are numerous, including allowing you to generate different views of your design in 2D drawings automatically, make changes parametrically, and show customers 3D representations of your designs.

- Source cadalyst

Proton Design Competition 2014 – calling budding designers to come up with a Proton City Car for 2020

 

Calling all budding Malaysian designers. Here’s your chance to show off your talents, courtesy of Proton Design Contest 2014. Aimed at youths aged between 13-25 years, the contest carries the theme “#PROTONCITYCAR2020” – paultan.org is the exclusive online motoring partner for the event.
The contest, which runs from today, June 24 to August 11, 2014, challenges participants to propose their creative vision of a future concept based on the given theme, using their favorite drawing tool – whether digital or pencil and paper.
Attractive prizes worth RM58,000 in total – ranging from cash rewards to a MacBook Air/Pro (complete with design software) plus cash for the top three finalists – are on the cards. The winner will also receive the Chairman’s Award, which is made up of a trophy and an internship at Proton’s R&D Creative Design Centre. The winning design is set to be built into a quarter-scale model and displayed at the Proton Gallery.

The automaker says it’s reaching out to local youths through the contest to raise awareness about the evolving reality of the automotive industry – “#PROTONCITYCAR2020″ is a creative platform aimed at motivating Malaysian youths towards the automobile segment and presenting their ideas on how future cars will shape up.
Here are the details on how you can enter the competition. The contest is divided into two categories – Category 1, for individuals within the ages of 13-17 and Category 2, for individuals within the ages of 18-25. Group entries are not allowed, and only Malaysians with a valid Malaysian identity card can take part.
All participants are required to design rendering sketches of an exterior outlook of the car on an A3-sized paper, inclusive of 3/4 front view, side view and rear view perspectives. For Category 2 participants, they are also required to design the interior outlook of the car.

Budding designers are no doubt busy working on their Proton Design Competition 2014 entries, envisioning their idea of what a Proton city car of 2020 should look like. Earlier in the week, we took a closer look at the automaker’s previous concepts.
There’s still more than a month to go before the closing of submissions – all entries have to be received by Proton by 11.59 pm, August 11, but apparently there have been questions fielded to the automaker by participants on how best to make their submissions and about usable formats.
All the details you need to know are outlined in the ‘Entry Format’ section of the Terms & Conditions part of the contest section on Proton’s Facebook page, but to make it easier for you, here’s an outline of the important points to remember:

• The contest is divided into two categories – Category 1, for individuals within the ages of 13-17 and Category 2, for individuals within the ages of 18-25.
• Please note that group entries are not allowed, and only Malaysians with a valid Malaysian identity card can take part.
• The vehicle must have a minimum of five passenger seats.
• All entries are required to feature renderings of an exterior outlook of the car – front 3/4 view, side view and rear 3/4 view. Category 2 (18-25 yr old) participants MUST also design an interior for their concept – be creative here.
• Renderings may be done using either digital media (CAD or graphics editing software such as Adobe Photoshop) or traditional media (pen, pencil, marker on paper).
• Traditional media renderings may be done on normal drawing paper, but MUST be sized in A3 (tabloid) sheet format, measuring within 270 mm to 300 mm by 420 mm to 450 mm.
• The rendering sketches MUST be coloured illustrations, using any artistic medium.
• The entries must NOT be sent pasted onto mounting board, or with binding.
• An entry must be of an original design relating to the theme of the competition, and not previously published work or a design that has been submitted for other competitions. The latter will result in disqualification.
• All entries MUST be accompanied by a design brief of the concept, on A4 paper (Arial font, 12 pt., 1.3” spacing) and must include:
  - The name of the design
  - Design concept (describe the idea behind the design)
  - Unique selling proposition of the car (what are the unique elements)
  - Propose the engine system of the car (how will it be powered?)
• All competition forms, except for those submitted online, must be posted by ordinary mail, with stamp(s) amounting to value of RM 1 or more. Forms submitted with stamp(s) lesser than RM 1 value will be rejected.
• Forms which are incomplete, difficult to read or spoilt in one form or another will be rejected and will be treated as disqualified entries. Proton has the final say in determining the eligibility of the competition forms.

    www.proton.com

    https://www.facebook.com/ProtonCars/app_305548702944454

DRARFTERMAL ASSOCIATION (Persahabatan Bowling)

BOWLING

Pada 14.06.2014 (Sabtu)
Jam 5.00pm /
Tempat : 1 Utama PJ Selangor..
DRARFTERMAL ASSOCIATION akan mengadakan perlawanan persahabatan antara Zon KL vs Zon PJ.(bowling). Ini merupakan aktiviti yg pertama dlm Group ni.. Mohon pd semua sahabat2 yg ada dlm group ni dpt memberi sokongan padu tuk menjayakan aktiviti nih melalui sokongan moral samada ikut serta sebagai pemain atau sebagai penyokong..

Tujuan sebenar aktiviti ni dianjurkan lebih kpd sesi mengenali antara 1 sama lain yg mana cenderung kpd ikatan ukhwah sesama ahli dimana ianya adalah sesuatu kekuatan dlm mana2 pertubuhan..
"SUKAN MAMPU MENGERATKAN IKATAN PERSAHABATAN"

Penyertaan dibuka skrg... !
Jom rebut peluang ini...

Daftar ahli / rekod sahaja.

https://docs.google.com/.../1PLoHav8PqmtofsFX.../viewform...

Booking kad bisness :

https://docs.google.com/.../1lpJ-A9mFxHKNtZ.../viewform...

Daftar persatuan "DRAFTERMAL ASSOCIATION"

Makluman kepada pelukis pelan, kami dari "draftermal Association" yg berdaftar dari bawah persatuan (ROS) kerajaan msia. Kami mengajak Encik, Cik, Puan yang berumur 18 tahun ke atas untuk mendaftar secara rasmi dengan persatuan (khas kepada pelukis pelan / atau berkaitan dengan lukisan teknikal CAD).

Untuk keterangan lanjut boleh hubungi timbalan setiausaha email ke : nik-wan@draftermal.net

Isi Online / rekod tidak rasmi :
https://docs.google.com/forms/d/1PLoHav8PqmtofsFXO2W4EPXmPS1Ee1dIot-LBZsSQfI/viewform

CAD Competition Challenge 2014" organised by DreamEDGE Sdn. Bhd

There will be a "CAD Competition Challenge 2014" organised by DreamEDGE Sdn. Bhd. which will be held on 16 June 2014 until 21 July 2014.

The theme will be "Tricycle".

The objective of this competition is to create innovative Tricycle's product by using CAD Software.

Anyone interested to join the competition please come and see me before end of this week.

Thanks

Download this form :
https://drive.google.com/file/d/0B9OfOIIF8k0ieEFuSThCckV0S2M/edit?usp=sharing

Designers & Senior Designers

We are currently seeking experienced designers to become a key part of our committed and improving design team. You will have a minimum of 3 years relevant experience (5 years for Senior) within the F1 environment. A practical and pro-active nature regarding a multitude of projects is a requirement, as you will form part of a project-based environment. Responsibility for appreciating the scope and delivery of projects is a must. The successful applicants will be expected to take on any design task with enthusiasm and a proven ability. An excellent working knowledge of 3D CAD (CATIA V5 preferable) and the ability to work with minimal supervision are a must.

Caterham F1 Team
Leafield Technical Centre Langley OX29 9EF Oxfordshire
UK ENGLAND
Please apply to hr@caterhamf1.com

Closing date for applications:  20 April 2014


Aero Designer - CAD Design Engineer


Would you like to

• work as Aero Designer within our Aerodynamics department and design parts for one of our long-term external motorsport project's wind tunnel model?
• generate complex surface models via the CATIA V5 CAD system?
• design components for rapid prototype manufacture and design precision mechanics elements, e.g. for the chassis and front and rear wings?
• design components based on surface models, respecting aspects such as practical usability of the model, packaging studies, producibility and simple assembly within the design?
• improve the aerodynamic performance of a race car in collaboration with Aerodynamicists, Model Makers and other Aero Designers within a very short lead time?

Do you have

• a basic training as designer (technical college) or mechanical engineer (university of applied sciences)?
• professional experience and a strong interest in focussing on 3D CAD design using CATIA V5?
• experience in 3D design of complex surfaces with CATIA V5 / GSD?
• good visualisation skills and imagination?
• a very good command of the English language?

Are you

• interested in working in a high-tech environment?
• used to working independently under time pressure?
• a committed team player, flexible and resilient?

If the above applies, and working in a dynamic, cross-functional environment appeals to you, we are looking forward to receiving your email application via hr@sauber-motorsport.com!

Sauber Motorsport AG
Rolf Matsch, Human Resources, CH-8340 Hinwil